The ultimate protective ceramic layer for gelcoat and yacht paint

Please refer to the instructions supplied with the product or click here:

http://gyeonquartz.com/wp-content/uploads/2019/02/q2r_marine_manual.pdf 

This coating is designed for all painted gelcoat surfaces of your vessel

Q²R Gelcoat lasts 1 to 2 seasons.

The coating has a shelf life of up to 12 months after opening, provided it is properly sealed with the transport cap. Store in a dry, dark, and cool place. Do not freeze or expose to sunlight.

Yes - Q²R Gelcoat requires at least one coat. Two coats are optional. Wait one hour between coats.

The product must be exposed to water for at least 48 hours after application.

We recommend using Q²R Wash and Q²R Maintain during your normal laundry routine. The coating is resistant to chemicals with a pH of 2 to 11.

Yes, to remove it you need to polish it mechanically with a polishing compound and a suitable polishing pad.

Yes, but such contaminants must be removed from the paint as quickly as possible.

No – Surface preparation (decontamination and degreasing) is crucial. Consult the instructions for use for more product-specific information.

Immediately after application, it may be helpful to wipe it down several times with Q²M Degrease. The next day, you should use a polishing machine.

Q²R Teak is an innovative ceramic coating specifically designed for maritime wood

Please refer to the instructions supplied with the product or click here:

http://gyeonquartz.com/wp-content/uploads/2019/02/q2r_marine_manual.pdf

This coating is designed for all painted gelcoat surfaces of your vessel

Q²R Teak lasts 1 season

The coating has a shelf life of up to 12 months after opening, provided it is properly sealed with the transport cap. Store in a dry, dark, and cool place. Do not freeze or expose to sunlight.

Yes - Q²R Teak requires at least one coat. Two coats are optional.

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

We recommend using Q²R Wash and Q²R Maintain during your normal laundry routine. The coating is resistant to chemicals with a pH of 2 to 11.

Yes, to remove it you need to polish it mechanically with a polishing compound and a suitable polishing pad.

Yes, but such contaminants must be removed from the paint as quickly as possible.

Q²R Degrease is a surface degreaser that is applied before applying a coating.

Spray on a Q²M PolishWipe and work section by section.

Cap the sprayer. Store it in a dry, dark, and cool place. Do not allow to freeze or expose to sunlight.

No, due to its alcoholic composition we advise not to let it dry on the surface.

Q²R Wash is a pH-neutral car/boat shampoo.

Pour 15-20 ml of Q²R Wash into a bucket of water. Mix the solution and continue with your washing routine.

This product is designed to be diluted in a wash bucket.

Close the pump tightly. Store it in a dry, dark, and cool place. Do not allow to freeze or expose to sunlight.

No.

Q²R Maintain is a silica-based spray sealant specifically designed for use on marine vessels.

Spray onto a microfiber cloth - wipe panel by panel - can be used as a drying aid on a wet surface - spray directly onto a drying cloth - dry

This solution is designed to be applied to any painted surface

Q²R Maintain lasts up to 3 weeks.

Cap the sprayer. Store it in a dry, dark, and cool place. Do not allow to freeze or expose to sunlight.

Yes, this is possible.

No.

We recommend using Q²R Wash during your normal laundry routine. The sealer is resistant to chemicals with a pH of 4 to 9.

Q²R VinylCleaner is a maintenance and plastic cleaner.

Use the Q²M BaldWipe for daily cleaning of interior upholstery. Use a brush and let it work into the rubber or exterior upholstery for a more thorough clean.

This solution is designed to be applied to any plastic surface of your vessel.

Cap the sprayer. Store it in a dry, dark, and cool place. Do not allow to freeze or expose to sunlight.

No.

Q²R Glass is a glass cleaner that is safe for plexiglass.

Spray directly onto a microfiber cloth and wipe over the glass surface until a streak-free result is achieved.

This solution is designed to be applied to any glass surface of your vessel

Cap the sprayer. Store it in a dry, dark, and cool place. Do not allow to freeze or expose to sunlight.

Q²R FabricCoat is an advanced, quartz-based, highly hydrophobic textile protection agent.

Apply Q²R FabricCoat only to a clean and completely dry surface. Cover surrounding elements to prevent overspray that will be difficult to remove. Always wipe the product with Q²R LeatherBrush for an even finish and tap it in until absorbed. Do not overapply. We recommend applying two thin coats instead of one thick one.

This coating is suitable for all types of fabrics, including convertible tops and Alcantara.

Q²R FabricCoat lasts up to 3 months

Yes, this is possible.

Do not touch the surface until it is completely dry. Do not expose it to the elements for at least 12 hours.

Use only regular, pH-neutral shampoos. Do not use fabric cleaners unless you plan to recoat.

The degree of beading isn't the only factor that determines protection. Even if Q²R FabricCoat doesn't bead, it still protects the surface from UV radiation and color change.

No, it shouldn't get sticky. Q²R FabricCoat has a formula designed to dry quickly. If it dries very slowly (because you've applied too much product), it may become sticky. In that case, clean the fabric with a low-pile microfiber cloth soaked in hot water.

Wipe multiple times with Q²R Degrease and Q²M BaldWipe

Q²R MetalPolish is the ultimate metal polish with a beautiful cutting quality and a glossy finish.

Please refer to the instructions for use on the bottle.

This solution is designed to be applied to a metal surface.

Close the dispenser tightly. Store it in a dry, dark, and cool place. Do not allow to freeze or expose to sunlight.

Since it is a mechanical process, it is important that you know how to use a polishing machine correctly before you start using it.

Q²R MarinePolish S1 is a powerful cutting paste that removes deep scratches or sanding marks.

Recommended use with a mechanical polisher of your choice.

All painted surfaces had to be thoroughly corrected.

Close the dispenser tightly. Store it in a dry, dark, and cool place. Do not allow to freeze or expose to sunlight.

Using Q²M Baldwipe/Polishwipe and a spray of Q²R Degrease or a safe dilution of IPA.

Q²R MarinePolish S2 is a high-cutting paste that removes swirls and moderate scratches.

Recommended use with a mechanical polisher of your choice.

On all painted surfaces, average correction required.

Close the dispenser tightly. Store it in a dry, dark, and cool place. Do not allow to freeze or expose to sunlight.

Using Q²M Baldwipe/Polishwipe and a spray of Q²R Degrease or a safe dilution of IPA.