Q2M Compound
Q²M Compound is a high-performance polishing compound, ideal for heavy paint corrections.
GYEON Q²M COMPOUND
What's so special about Q²M Compound?
GYEON Q²M Compound is a heavy polishing compound developed to remove deep scratches and severe paint defects in record time. Despite its high level of abrasiveness (high cut), the formula is water-based and contains no silicones or fillers. This means the result you see is truly the definitive result, without scratches "reappearing" later.
The technology in this compound ensures a rapid breakdown of the abrasive grains, which causes the product to generate relatively little dust while leaving a surprisingly good finish for a product with such cutting power. It is the ideal first step for vehicles with neglected paint or after wet sanding.
MANUAL
How do you use Q²M Compound?
Apply three to four drops of Q²M Compound to a coarse polishing pad, such as the Q²M Coarse Wool or the Q²M Heavy Cut Foam pad. Work on a small area of approximately 40x40 cm. Spread the compound on the lowest speed setting of the polisher and then increase the speed to a medium or high setting. Work with even pressure in overlapping passes until the compound becomes transparent.
Wipe off the residue with a clean microfiber cloth and inspect the result using Q²M Prep to ensure that the defects have been completely removed. For a perfect high-gloss finish, it is recommended to follow up this step with a finer polish such as Q²M Polish.
The details
| CAPACITY | 120 ml, 1 L |
| USAGE | Polishing |
| TYPE | Polishing agent |
| LINE | Q2M |
| EAN | 8809432673781 |