It's a solid transparent, slick and highly self-cleaning silica-based protective layer once crystallized on any surface of your vehicle.

Yes - most of our coatings are designed to be user-friendly. Each set includes a user manual to take you to step by step through the process

A wax is a layer designed to perform for a limited time, as it doesn't create a permanent or semi-permanent bond with the paint. a wax is a mixture of organic and inorganic components like carnauba wax, beeswax or synthetic PET-C or polymer-based ingredients. It adds gloss and repellency but will fade after few washes due to its low chemical resistance. A ceramic coating, on the other hand, is a mixture of Silica or Polysilazanes with solvents coming in the form of a liquid, which crystallizes after the evaporation of the solvent and creates a solid layer on the surface. This layer is highly chemical resistant and once cured, it can be removed from the surface only by mechanical polishing.

"Quartz", "glass" & "ceramic" are synonyms used for one and same type of product - SiO₂ (silica-dioxide) coatings. Do not get distracted by fake marketing.

All our quartz coatings within the Q² line show higher resistance to scratches compared to a non-coated car due to their slickness. However, they will not make your car scratch resistant and will not protect against swirls caused by automatic car washes, brushes, wrong maintenance or any form of vandalism.

If your coating is not beading anymore, the reason might be simple. The surface accumulated contamination (tar, tree sap, metallic contamination) with time. Your coating is still there and protects your car against UV rays or chemicals. We recommend performing chemical decontamination with the help of Q²M Iron & Q²M Tar to remove contamination and use Q²M Cure or Q²M WetCoat to restore initial repellency.

Make sure you maintain your coated vehicle regularly with the use of correct tools and products. A basic set shall include two buckets with dirt separators, a Ph. neutral shampoo, high-quality wash mitt and drying towels. We highly advise you to use the Q²M Cure maintenance spray periodically to increase slickness, hydrophobicity and gloss. Include chemical decontamination in your maintenance procedure. Once you feel spot contamination on your paint, use Q²M Tar and Q²M Iron to remove it.

After the application of any ceramic coating, we recommend to not wash your vehicle for a minimum of 14 days.  

Contact with detergents/chemicals during the first 14 days. Any use of automatic car washes is forbidden. Avoid exposing your vehicle to strong sun operation once wet.

No - Only a quality paint protection film will.

By machine polishing. Once a ceramic coating fully cures, the only way to remove it from painted surfaces it mechanical polishing with a cutting compound.

Q² Wax is durable a fluorine based wax for any colour type.

Make sure to wash and degrease the surface properly for maximum performance. Apply a light and uniform layer over dry paintwork. Leave it to cure for a minimum of 30 minutes before wipe-off. We recommend using Q²M PolishWipe EVO for that job.

Q² Wax lasts up to 4/6 months.

Yes - removal will require mechanical polishing with a compound and appropriate polishing pad or multiples use of strong chemicals such as Q²M APC 1:1.

Yes.

No, only on well prepared, decontaminated and degreased with Q²M Prep surfaces or on top of another ceramic coating.

Q² Wax can be applied on every glossy painted surfaces included plastic & metal.

Yes, it can be applied as a top coat to any high-quality ceramic coating. Make sure the coating underneath is dry and had time to cure.

No. However you can use any product of our maintenance line to maximise and extend its properties.

Nothing can entirely prevent water marks. They can happen on bare, waxed and coated paint as well. Bird residue is one of the harshest and most damaging substance known. A coating will provide you with the time necessary to remove the contamination without etching. However, once you leave it on a hot summer day for many hours, not even a coating will prevent damage entirely.

We recommend the use of Q²M Bathe+, Q²M Cure, Q²M Ceramic Detailer or Q²M Wetcoat during your normal wash routine. If the properties of the Q² Wax start to diminish - wash your car with Q²M Restart Wash and re-apply a layer over it.

It will provide gloss and visual slickness, a typical "glass-like-gloss". You will benefit from enhanced colour and depth as well.

When you finish applying Q² Wax, the car should remain in the garage/studio for 12 hours. Any contact with chemicals/detergents shall be avoided for the next 7 to 14 days.

Make sure to close the tube properly with both top clear cover and top screw. Store it in a dry, dark, and cool place. Please do not allow it to freeze or be exposed to sunlight. Once opened, it has a "good-to-use" shelf life of 2 years.

Q² CanCoat EVO is a SiO2 based coating, a durable and glossy product very easy to use.

Simply spray Q² CanCoat EVO onto the included microfibre, wipe a small section until full gloss is achieved. Change the side of the fibre and give the surface one last wipe to ensure a perfect finish.

Q² CanCoat EVO lasts up to 12 months / 12k km.

Q² CanCoat EVO is a very versatile product. You are allowed to apply it to paint, trim, rims, metal, carbon fibre & PPF/Vinyl.

Remove and clean the included sprayer. Store it in a dry, dark, and cool place. Please do not allow it to freeze or be exposed to sunlight. Once opened, it has a "good-to-use" shelf life of 2 years.

Yes, wait minimum 1h between each layer.

No, only on well prepared, decontaminated and degreased with Q²M Prep surfaces or on top of another ceramic coating.

No, but Q² Wax can be layered over it, 12h after application.

Yes, it can be applied as a top coat to any high-quality ceramic coating.

No, every ceramic coating requires excellent surface preparation and degreasing prior to application.

When you finish applying Q² CanCoat EVO the car should remain in the garage/studio for 12 hours. Any contact with chemicals/detergents shall be avoided for the next 7 days.

We recommend the use of Q²M Bathe+, Q²M Cure or Q²M WetCoat during your normal wash routine. The coating is designed to resist chemicals with a Ph. within 3 to 11, so a wide variety of specifics is allowed during daily maintenance.

Yes - removal will require mechanical polishing with a compound and appropriate polishing pad.

Nothing can entirely prevent water marks. They can happen on bare, waxed and coated paint as well. Bird residue is one of the harshest and most damaging substance known. A coating will provide you with the time necessary to remove the contamination without etching. However, once you leave it on a hot summer day for many hours, not even a coating will prevent damage entirely.

It will provide gloss and visual slickness, a typical "glass-like-gloss". You will benefit from enhanced colour and depth as well.

Right after the application, multiple wipes with Q²M Prep & Q²M Polishwipe might help. On the next day, you will have to use a machine polisher.

Q² One EVO is a one layer coating for enthusiasts who want more durability & gloss than the entry level Q² CanCoat EVO.

Please refer to the instruction manual that you find included with the product or here: https://gyeonquartz.com/wp-content/uploads/2022/01/paint-coatings-manual.pdf

Q² One EVO lasts up to 24 months/25,000 km.

This coating is designed for all painted surfaces of your vehicle.

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes, although it is designed to be fully functional with just one layer.

Yes, except matte surfaces.

Yes, we recommend Q² CanCoat EVO or Q² Wax as a top-up product.

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

No, every ceramic coating requires excellent surface preparation and degreasing prior to application.

No.

We recommend using Q²M Bathe+, Q²M Cure, or Q²M Wetcoat during your normal washing routine. The coating is resistant to chemicals with a pH between 2 and 11, allowing for a wide range of specific properties during daily maintenance.

Yes - removal will require mechanical polishing with a compound and appropriate polishing pad.

Yes, but such contaminants must be removed from the paint as quickly as possible.

After a complete maintenance wash, continue with surface decontamination with Q²M Iron and Q²M Tar. Use Q²M Cure or Q²M WetCoat to restore the original repellency.

No, but surface preparation (decontamination and degreasing) is crucial. Consult the instructions for use for more product-specific information.

We recommend applying Q²M Cure REDEFINED at least 12 hours after application and using a maintenance product after every wash.

Right after the application, multiple wipes with Q²M Prep & Q²M Polishwipe might help. On the next day, you will have to use a machine polisher.

Q² Pure EVO is the highest concentration SiO₂ coating in the range. It delivers a gloss finish and excellent hydrophobicity in a single coat.

Please refer to the instructions supplied with the product or here: https://gyeonquartz.com/wp-content/uploads/2022/01/paint-coatings-manual.pdf

Q² Pure EVO lasts up to 36 months/40,000 km.

This coating is designed for all painted surfaces of your vehicle.

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes, although it is designed to be fully functional with just one layer.

Wait at least 1 hour between coats.

Yes, except matte surfaces.

Yes, we recommend Q² CanCoat EVO or Q² Wax as a top-up product.

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

No.

We recommend the use of Q²M Bathe+, Q²M Cure or Q²M WetCoat during your normal wash routine. The coating is designed to resist chemicals with a Ph. within 3 to 11, so a wide variety of specifics is allowed during daily maintenance.

Yes - removal will require mechanical polishing with a compound and appropriate polishing pad.

Yes, but such contaminants must be removed from the paint as quickly as possible.

After a complete maintenance wash, continue surface decontamination with Q²M Iron REDEFINED and Q²M Tar REDEFINED. Use Q²M Cure REDEFINED or Q²M WetCoat to restore the original repellency.

No, but surface preparation (decontamination and degreasing) is crucial. Consult the instructions for use for more product-specific information.

We recommend applying Q²M Cure REDEFINED at least 12 hours after application and using a maintenance product after every wash.

Right after the application, multiple wipes with Q²M Prep & Q²M Polishwipe might help. On the next day, you will have to use a machine polisher.

This is a natural phenomenon with ceramic coatings. A wipe with Q²M Cure solves this problem.

Q² Matte EVO is a coating designed for matte paintwork providing hydrophobicity & protection without altering the finish of your car's paint.

Please refer to the instruction manual that you find included with the product or here: https://gyeonquartz.com/wp-content/uploads/2022/01/paint-coatings-manual.pdf 

Q² Matte EVO lasts up to 24 months/30,000 km.

This coating is designed for all painted surfaces of your vehicle.

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes.

It can't hurt.

Yes, we recommend using Q²M Matte.

No.

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

We recommend using Q²M Bathe+ and Q²M Wetcoat during your normal washing routine. The coating is resistant to chemicals with a pH of 2 to 11.

No. However, it will fade naturally over time due to exposure to chemicals and UV rays.

After a complete maintenance wash, continue with surface decontamination using Q²M Iron and Q²M Tar. Use Q²M Cure Matte to restore the initial repellency.

After a complete maintenance wash, proceed to surface cleaning with Q²M Iron and Q²M Tar.

We recommend applying Q²M Cure Matte REDEFINED at least 12 hours after application and using a maintenance product after every wash.

We recommend applying Q²M Cure Matte REDEFINED at least 12 hours after application and using a maintenance product after every wash.

Q² Mohs EVO is an advanced, fluoro-modified polisilazane coating, a durable and water-repellent coating for professionals and enthusiasts.

Please refer to the instructions supplied with the product or here: https://gyeonquartz.com/wp-content/uploads/2022/01/paint-coatings-manual.pdf

This coating is designed for all painted surfaces of your vehicle.

Q² Mohs EVO lasts up to 36 MONTHS / 40K KM with 1 coat and 48 MONTHS / 50KKM with 2 coats.

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes, wait about 1 hour between coats, but no longer than 2 hours.

Yes.

Yes - We recommend using Q² CanCoat EVO or a high-quality natural wax.

No.

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

We recommend using Q²M Bathe+ and Q²M Wetcoat during your normal washing routine. The coating is resistant to chemicals with a pH of 2 to 11.

Yes - removal will require mechanical polishing with a compound and appropriate polishing pad.

Yes, but such contaminants must be removed from the paint as quickly as possible.

After a complete maintenance wash, continue surface decontamination with Q²M Iron REDEFINED and Q²M Tar REDEFINED. Use Q²M Cure REDEFINED or Q²M WetCoat to restore the original repellency.

No, but surface preparation (decontamination and degreasing) is crucial. Consult the instructions for use for more product-specific information.

We recommend applying Q²M Cure REDEFINED at least 12 hours after application and using a maintenance product after every wash.

Right after the application, multiple wipes with Q²M Prep & Q²M Polishwipe might help. On the next day, you will have to use a machine polisher.

This is a natural phenomenon with ceramic coatings. A wipe with Q²M Cure solves this problem.

Q² Syncro EVO is an advanced two-phase formula that delivers amazing results with minimal effort. Q² Syncro EVO offers incredible shine and water-repellent properties.

Please refer to the instructions supplied with the product or here: https://gyeonquartz.com/wp-content/uploads/2022/01/paint-coatings-manual.pdf

This coating is designed for all painted surfaces of your vehicle.

Q² Syncro EVO lasts up to 50 months/50,000 km.

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes - The Q² Mohs EVO base layer requires 1 layer (2 are optional and allowed) and the Q² Skin top layer can also be applied in multiple layers.

Yes, except for matte surfaces.

You may use Q² CanCoat EVO, but only for maintenance purposes and after a period of at least 6 months.

No, it is a standalone coating system.

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

We recommend using Q²M Bathe+ and Q²M WetCoat during your normal laundry routine. The coating is resistant to chemicals with a pH of 2 to 11.

Yes - removal will require mechanical polishing with a compound and appropriate polishing pad.

Yes, but such contaminants must be removed from the paint as quickly as possible.

After a complete maintenance wash, continue with surface decontamination with Q²M Iron and Q²M Tar. Use Q²M Cure or Q²M WetCoat to restore the original repellency.

No, but surface preparation (decontamination and degreasing) is crucial. Consult the instructions for use for more product-specific information.

We recommend applying Q²M Cure as a maintenance product after every wash.

Right after the application, multiple wipes with Q²M Prep & Q²M Polishwipe might help. On the next day, you will have to use a machine polisher.

Q² Skin EVO is a SiO2-based topcoat that offers extreme gloss and excellent water repellency.

Q² Skin EVO must be applied at least 1 hour after the last layer of Q² Mohs EVO.

Q² PPF EVO is a very easy to apply flexible, single-layer coating for all types of PPF and vinyl.

Please refer to the instructions supplied with the product or here: https://gyeonquartz.com/wp-content/uploads/2022/01/paint-coatings-manual.pdf

Please refer to the instructions supplied with the product or here: https://gyeonquartz.com/wp-content/uploads/2022/01/paint-coatings-manual.pdf

Q² PPF EVO lasts up to 12 months.

Yes, but that is not required.

No, Q² PPF EVO is designed to be applied to flexible surfaces, such as polyurethane, which is found on most PPF and vinyl wraps on the market.

Yes, but only on glossy PPF or wrap. Removal requires mechanical polishing with a polishing compound and a suitable polishing pad. Q²M PPF Renew is recommended.

You can finish it with Q²M PPF Maintain, a silica maintenance spray.

No.

The product must be exposed to atmospheric influences for at least 24 hours after application and then for a further 14 days without washing with cleaning agent.

Immediately after application, several wipes with Q²M Prep and Q²M Polishwipe can help. The next day, you should use a polishing machine. However, removal is only possible on glossy PPF or wrap.

No, but surface preparation (decontamination and degreasing) is crucial.

For more product specific information, please refer to the instructions for use.

We recommend using Q²M Bathe+ and Q²M WetCoat during your normal washing routine. The coating is designed to withstand chemicals with a pH of 2 to 11. Apply Q²M PPF Maintenance regularly to improve water repellency and smoothness.

After a complete maintenance wash, continue surface decontamination with Q²M Iron REDEFINED. Use Q²M PPF Maintain REDEFINED or Q²M WetCoat to restore the original repellency.

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Q² Flash EVO, unique dedicated coating for Certified Mobile Detailer. Its polysilazane fast curing formula allows application under various conditions.

This product is unique and requires adequate training to use it correctly. Therefore, only select and approved Mobile Certified Detailers have access to it. This exclusivity allows Gyeon to maintain a high quality standard and support both customers and detailers with a warranty.

This can only be applied by a Mobile Certified Detailer.

The product must be exposed to atmospheric influences for at least 3 hours after application and then for a further 14 days without washing with cleaning agent.

We recommend using Q²M Bathe+ and Q²M WetCoat during your normal wash routine. The coating is resistant to chemicals with a pH of 2 to 11. For more information, contact your certified detailer.

Yes - mechanical polishing with a polishing compound and a suitable polishing pad is required for removal. For more information, contact your Gyeon Certified Detailer.

Yes, but such contaminants must be removed from the paint as quickly as possible.

After a complete maintenance wash, continue with surface decontamination with Q²M Iron and Q²M Tar. Use Q²M Cure or Q²M WetCoat to restore the original repellency.

This depends on the inspection by your certified retailer. Trust their opinion.

Q² CanCoat Pro EVO is a concentrated SiO2 coating. It's available as both a standalone and a certified coating, available exclusively to Gyeon Certified Detailers.

Simply spray Q² CanCoat Pro EVO onto the included microfiber cloth and wipe a small area until the full shine is achieved. Switch sides and wipe the surface one last time for a perfect finish.

Q² CanCoat Pro EVO is a highly versatile product. You can use it on paint, trim, wheels, metal, carbon fiber, and PPF/vinyl.

Q² CanCoat Pro EVO lasts up to 12 months / 15,000 km.

Remove and clean the included sprayer. Close the can with the original metal cap. Store the can in a dry, dark, and cool place. Do not allow the can to freeze or expose it to sunlight. Once opened, the can has a shelf life of 2 years.

Yes.

No, only on well prepared, decontaminated and degreased with Q²M Prep surfaces or on top of another ceramic coating.

No.

Yes, it can be applied as a top coat to any high-quality ceramic coating.

No, every ceramic coating requires excellent surface preparation and degreasing prior to application.

After applying Q² CanCoat Pro EVO, the car should remain in the studio for 12 hours. Avoid contact with chemicals/cleaners for the next 7 days.

We recommend using Q²M Bathe+, Q²M Cure REDEFINED, or Q²M WetCoat during your regular laundry routine. The coating is resistant to chemicals with a pH between 3 and 11, allowing for a wide range of specific applications during daily maintenance.

Yes - removal will require mechanical polishing with a compound and appropriate polishing pad.

Nothing can entirely prevent water marks. They can happen on bare, waxed and coated paint as well. Bird residue is one of the harshest and most damaging substance known. A coating will provide you with the time necessary to remove the contamination without etching. However, once you leave it on a hot summer day for many hours, not even a coating will prevent damage entirely.

It will provide gloss and visual slickness, a typical "glass-like-gloss". You will benefit from enhanced colour and depth as well.

Immediately after application, several wipes with Q²M Prep and Q²M Polishwipe EVO can help. The next day, you should use a polishing machine.

No, Q² CanCoat Pro EVO is only intended for Gyeon-certified detailers

Q² Primer is an ultra-light topcoat and also a SiO₂ primer.

Using a polishing machine and our Q²M Finish Pad.

This primer is designed for all painted, glossy surfaces of your vehicle before applying the coating.

Close the dispenser tightly. Store it in a dry, dark, and cool place. Do not freeze or expose it to sunlight. Once opened, it has a shelf life of 2 years.

No, note the basic rules for using polishing machines.

Q² Rim EVO is a ceramic coating designed to protect various types of rims. Thanks to its high-temperature resistance, it can also be used on metal and chrome parts such as exhaust pipes and brake calipers.

First, make sure the wheel is clean, dry, and free of oil or dirt.

We recommend using Q²M Prep before applying the coating.

Apply a generous amount of Q² Rim EVO to the included applicator and the suede. Wipe off immediately after application. Let the coating cure for at least 12 hours before driving.

This coating is designed for your vehicle's rims/metallic/chrome/exhaust trims/brake calipers.

Q² Rim EVO lasts up to 18 months/45,000 km

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes, wait 1 hour between coats.

Yes - We recommend Q² CanCoat/Pro or Q²M Cure REDEFINED and Q²M WetCoat can be applied over it

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

Continue with your standard wheel cleaning procedure. Avoid using highly acidic cleaners. Specific products like Q²M Iron WheelCleaner REDEFINED and Q²M TireCleaner can be used without risk of damaging the coating. The coating is designed to withstand chemicals with a pH of 2 to 11.

Yes - removal will require mechanical polishing with a compound and appropriate polishing pad.

After a complete maintenance wash, continue with surface decontamination with Q²M Iron REDEFINED and Q²M Tar REDEFINED. Use Q²M WetCoat or Q²M Cure REDEFINED to restore the repellency.

Immediately after application, several wipes with Q²M Prep and Q²M Polishwipe EVO can help.

Q² Trim EVO is a protective ceramic coating with very strong restorative/colour-enhancing properties, suitable for all types of plastic.

Please refer to the instructions supplied with the product or here: https://gyeon.co/wpcontent/uploads/2025/02/2023exteriorcoatingsmanual.pdf

This coating is designed for the plastic exterior trim (incl. headlight) of your vehicle.

Q² Trim EVO lasts up to 36 months/50,000 km.

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes.

No.

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

We recommend using Q²M Bathe+ and Q²M Wetcoat during your normal washing routine.

Yes, to remove it, you need to polish it mechanically with a polishing compound and a suitable polishing pad. This is only possible with glossy panels.

Don't worry. Water repellency isn't the only indicator of the coating's presence. Disinfect the surface and check the repellency. If the repellency has disappeared, but the color intensity is still at the desired level, you can leave the coated panel in place for a while. Otherwise, you can recoat the panel.

Immediately after application, several wipes with Q²M Prep and Q²M Polishwipe can help.

Q² View EVO is a durable and rain-repellent product.

Please refer to the instructions supplied with the product or here: https://gyeon.co/wpcontent/uploads/2025/02/2023exteriorcoatingsmanual.pdf

This coating is designed for the outer glass parts of your vehicle.

Q² View EVO lasts up to 24 months/50,000 km

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes.

No.

The product must be exposed to atmospheric influences for at least 12 hours after application and then for a further 14 days without washing with cleaning agent.

We recommend using a GYEON shampoo during your normal washing routine and cleaning it periodically with Q²M Glass.

Yes, you'll need Q²M Glass Polish. It's included in the product package.

Check the glass surface for contamination. Remove it with a clay stick. Clean the glass with Q²M Glass.

Wipe the coating with a damp cloth and check again.

Yes – Q²M GlassPolish provides perfect surface preparation and also acts as a bonding agent.

Q² QuickView is an easy-to-apply and durable rain repellent.

Please refer to the instructions on the product or here:

https://youtu.be/iO6oH4cMNdg

This coating is designed for the outer glass parts of your vehicle.

Yes, but this does not extend its durability.

Q² QuickView can last up to 6 months/30,000 km

Q² QuickView must cure for 5 minutes before wiping. Ideally, we recommend keeping the coated surface out of water for 12 hours after application.

Yes, this requires the use of an abrasive.

Check the glass surface for contamination. Remove it with a clay stick. Clean the glass with Q²M Glass.

Wipe the coating with a damp cloth and check again.

No.

No.

Q² Fabric Coat is an advanced, quartz-based, highly hydrophobic textile protection agent.

Apply Q² FabricCoat only to a clean and completely dry surface. Cover surrounding elements to prevent overspray that will be difficult to remove. Always wipe the product with Q²M LeatherBrush for an even finish and tap it in until absorbed. Do not overapply. We recommend applying two thin coats instead of one thick one.

This coating is suitable for all types of fabrics found in your vehicle, including convertible tops and Alcantara.

Q² Fabric Coat lasts up to 6 months

Yes.

Do not touch the surface until it is completely dry. Do not use the vehicle for at least 12 hours.

Use only regular, pH-neutral shampoos. Do not use fabric cleaners unless you plan to recoat.

Only using a textile cleaner and a vacuum cleaner with extraction.

Beading isn't the only factor that determines protection. Even if Q² FabricCoat doesn't bead, it still protects the surface from UV radiation and discoloration.

No, it shouldn't get sticky. Q² FabricCoat has a formula designed to dry quickly. If it dries very slowly (because you've applied too much product), it may become sticky. In that case, clean the fabric with a low-pile microfiber cloth soaked in hot water.

Wipe multiple times with Q²M Prep and Q²M BaldWipe

Yes.

Wipe several times with Q²M Prep and Q²M BaldWipe, or use hot water and regular shampoo. Hot water helps dissolve residue.

Depending on the material the manufacturer uses, it works perfectly on shoes and various accessories. However, some textiles not used in cars may react differently due to the chemical treatment. Do so at your own risk.

Q² LeatherShield EVO is a ceramic leather coating designed to repel dirt, prevent discoloration, and protect against liquids and UV rays.

Please refer to the instructions supplied with the product or click here:https://gyeon.co/wp-content/uploads/2025/02/2023interiorcoatingsmanual.pdf

Make sure the leather is clean and dry. Use the included applicator and rub a small amount of product onto each panel. Let it dry. Ensure an even finish after 15 minutes of application. Reapply if necessary.

Q² LeatherShield EVO lasts up to 18 months/30,000 km

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

Yes.

Yes, we recommend using Q² LeatherCoat REDEFINED for maintenance purposes.

Do not touch the coated parts for at least 1 hour. Do not use the vehicle for at least 12 hours after use.

We recommend using Q²M LeatherCleaner Natural and Q² LeatherCoat REDEFINED (available together in the Q²M Leather Set)

No. If you have a specific problem, please contact us using the contact form.

No. The top surface of the leather will become contaminated over time, but this contamination will settle on the coating

Reapply a small amount of product to the affected area. Clean the leather if necessary and reapply the coating.

Q² Antifog is a coating that prevents condensation of moisture on your interior windows.

Please refer to the instructions for use that came with the product or here: http://gyeonquartz.com/wp-content/uploads/2016/10/all-suface-manual.pdf

This coating is designed for the interior windows of your vehicle

Q² AntiFog works for up to 2 months.

Store in a dry, dark, and cool place. Do not freeze or expose to sunlight. Once opened, it has a shelf life of 2 years.

No.

Do not touch the glass for at least 2 hours after application.

Yes, using a glass cleaner.

This can happen due to incorrect surface preparation or because the windows have been cleaned with a glass cleaner after Q² AntiFog had been applied.

Q² LeatherCoat REDEFINED is a leather sealer that provides protection and is dirt-repellent.

Make sure the leather is clean and dry. Use the Q²M MF Applicator and rub a small amount of product onto each panel. Let it dry. Wipe it off after 10-15 minutes for a completely matte finish.

This coating is designed for leather upholstery of your vehicle's interior, but can also be used on marine leather.

Q² LeatherCoat REDEFINED lasts up to 3 months

Yes.

No.

Do not use the chairs for at least 1 hour after using Q² LeatherCoat REDEFINED.

We recommend using Q²M LeatherCleaner Natural (available in the Q²M Leather Set)

Yes. Cleaning the surface multiple times with a special leather cleaner will reduce the wear of Q² LeatherCoat REDEFINED.

No - The top surface of the leather will become contaminated over time, but this contamination sits on top of the coating, making the cleaning process easier

Reapply a small amount of product to the affected area. Clean the leather if necessary and reapply the coating.

Q² Tire is the only quartz-based tire repair fluid

Apply one pump of product to the applicator of your choice (you can use our Q²M MF Applicator). Rub the product over the sidewall of your tire. Use only on dry and properly prepared tires. Ensure optimal surface preparation with Q²M TireCleaner.

On all types of tires

Q² Tire lasts up to 5 washes, but even when the repellent effect stops, a pleasant visual effect remains

Yes.

Yes - We recommend using Q²M TireExpress.

Do not drive for at least 15 minutes after application.

Yes, using Q²M TireCleaner.